|
The Incubating
Microplate Shaker is optimized for shaking microplates,
deep-well plates, or micro-tubes.
Operating Features:
Microprocessor Control: The
variable speed microprocessor control provides consistent uniform shaking
action. Microprocessor will display last set-point and will restart if
power is interrupted.
PID Temperature Controller:
Maintains precise temperature control from ambient +5°C to 65°C. Easy to
use controls allow users to adjust temperature in 1°C increments.
Triple Eccentric Drive:
Permanently lubricated ball bearings and maintenance free, brushless DC
motor provide reliable service and continuous duty operation.
LED Display: Touch pad controls
with easy-to-read, independent LED displays for temperature, speed, and
time allow operator to view all settings at once. Provides repeatable and
accurate results every time and is easily visible across lab benches.
Timer will display elapsed time or when programmed to user defined limit,
will shut off unit when time reaches zero. Display will show last used
settings, even after power has been turned off.
Temperature Calibration Mode:
Allows user to calibrate unit to an external temperature device.
Safety Features:
Overload Protection: Audible and
visual signals will activate when system detects an obstruction or
overload of the tray.
Ramping Feature: Slowly increases
speed to desired set-point to avoid splashing.
Audible Alarm: In timed mode,
alarm will sound when the time reaches zero.
Caution Hot Indicator: Symbol
illuminates when the temperature of the air in the chamber reaches 40°C
and remains lit until temperature cools down.
Spill-Resistant Design: Channels
fluids away from internal components.
Polycarbonate Lid: Clear lid
permits viewing of samples without disturbing internal temperature. Opaque
lid prohibits light exposure to light sensitive samples.
Operating Conditions:
Unit can be run
from 5 to 40°C (41 to 104°F).
Applications:
Immunoassays and
hybridizations.
|
Incubating 